Antirutsch für Dusche und Nassbereich

Anti-slip for showers and wet areas

Showers can quickly become slipping hazards. This can be dangerous, especially for older people or those with physical limitations. We show how you can make showers slip-resistant. 

2 min read

Anti-slip for showers and wet areas: How can you make a shower slip-resistant?

Slipping in the shower is a common problem that can lead to injuries. To increase safety, various measures can be taken:

  1. Anti-slip mats: These mats can simply be placed on the shower floor and provide a secure grip.
  2. Non-slip tiles: When renovating or building new showers, special non-slip tiles can be used.
  3. Anti-slip coatings: These coatings are applied directly to the shower surface and increase friction.
  4. Regular cleaning: Cleaning the shower surface of soap residue and dirt is crucial to maintain slip resistance.

Why are anti-slip coatings particularly suitable for making showers slip-resistant?

Anti-slip coatings are particularly effective for making showers slip-resistant because they offer the following advantages:

  1. Increased surface friction: They alter the surface structure, which significantly increases slip resistance.
  2. Versatility: Anti-slip coatings can be applied to various materials such as tiles, ceramics, or plastics.
  3. Durability: High-quality anti-slip coatings are resistant to water, cleaning agents, and abrasion, which extends their lifespan.
  4. Ease of application: Application is straightforward and does not require major renovations.

How must the shower tray be pre-treated?

Before an anti-slip coating is applied to the shower tray, the following preparations are necessary:

  1. Cleaning: The surface must be thoroughly cleaned to remove soap residue, dirt, or oils.
  2. Drying: After cleaning, the shower tray should be completely dry to ensure optimal adhesion of the coating.
  3. Sanding: If necessary, the surface can be lightly sanded to improve adhesion. However, this should be done carefully and evenly to avoid causing damage.
  4. Degreasing: Degreasing the surface with a suitable cleaner can also be helpful.

What should be considered when applying anti-slip coatings?

When applying anti-slip coatings, the following points should be taken into account:

  1. Temperature and weather conditions: Application should take place at optimal temperatures (ideally between 15 and 25 degrees Celsius) to ensure good adhesion.
  2. Material selection: The correct anti-slip coating should be chosen according to the material of the shower tray.
  3. Uniform application: The coating should be applied evenly to ensure consistent slip resistance. This can be done by rolling or spraying.
  4. Curing time: After application, the coating must be given sufficient time to cure before the shower is used again.
  5. Safety precautions: When applying, appropriate protective equipment, such as gloves and respiratory protection, should be worn.

Conclusion

A safe shower is crucial to avoid slip accidents. Anti-slip coatings offer an effective and durable solution to increase slip resistance. Through proper preparation of the shower tray and adherence to the application instructions, safety in the shower can be significantly improved.