To Product Overview

Protec EPX epoxy-based anti-slip coating

Protec EPX epoxy-based anti-slip coating

5 kg

Color: Hellgrau
€448,50
€448,50
Tax included. Shipping calculated at checkout.
  • Secure Checkout
  • Tried and tested
  • Top Reviews

Plus shipping (calculated in the shopping cart)

Delivery time approx. 2 - 4 working days

Questions about this product?

Quote for larger quantities?

Anti-slip epoxy-based coating for particularly demanding areas of application. Maximum safety even in high humidity and under heavy mechanical stress. 

  • Excellent corrosion protection due to zinc phosphate
  • Exceptional adhesion to metal and concrete surfaces
  • Maximum mechanical resistance 
  • Extreme chemical resistance
Suitable for
  • Highest demands in industrial environments
  • Maximum chemical resistance to all influences
  • Extreme mechanical loads
  • Outdoor applications (e.g. offshore, wind power, shipbuilding, etc.)

Product description

Protec EPX is a solvent-based, two-component anti-slip coating based on epoxy resin, specifically developed for extreme conditions in offshore wind farms. Thanks to its highly resistant formulation, it offers not only excellent corrosion protection through zinc phosphate, but also exceptional adhesion to metal and concrete surfaces.

With the highest anti-slip class R13, Protec EPX ensures maximum safety, even under difficult weather conditions, high humidity, and heavy mechanical stress. This makes the coating ideal for use on platforms, walkways, maintenance areas, and other safety-critical zones of offshore facilities. The coating meets the requirements for slip resistance in workrooms in accordance with ASR A1.5/1,2 "Floors" and thus actively contributes to occupational safety.

Datasheet

Package size

5 kg container, others on request

Consumption quantities

Spray gun approx. 1.1 - 1.3 kg/sqm
Rolling approx. 1.2 - 1.4 kg/sqm

Processing temperature

Above 10 degrees Celsius

Drying

Air drying at 20 degrees Celsius

Pre-treatment

The substrate must be free of substances that impair adhesion, such as oils, greases, and surfactants. We recommend using appropriate chemical (e.g., phosphating, chromating) or mechanical (e.g., blasting) pretreatment methods in accordance with the requirements. If Protec Two is to be applied to fresh concrete, the concrete must cure for at least 28 days beforehand. Metal surfaces must be pretreated with Protec primer.

Consistency

Permanently durable
Protec EPX epoxy-based anti-slip coating

€448,50

Product highlights

Learn more about this product

Antirutsch Windkraft

DEVELOPED WITH THE CUSTOMER

Designed for offshore, wind power, and shipyards

We developed this anti-slip coating because our client, the operator of a wind turbine, could not find a suitable coating. We implemented all requirements regarding application, durability, resistance, and slip resistance to create a unique coating for the harshest environments.

Antirutsch Offshore

SUITABLE FOR THE TOUGHEST APPLICATIONS

Suitable for extreme conditions

Protec EPX is a two-component anti-slip coating designed for the toughest conditions. It offers excellent corrosion protection due to zinc phosphate and exceptional adhesion to various surfaces.

Developed in collaboration with the customer

The product was developed according to the requirements of the wind power industry and meets the toughest demands better than any other coating.

Based on epoxy resin for maximum durability

Thanks to its epoxy resin formulation, the coating offers excellent properties in terms of corrosion protection, durability, and workability.

Uncompromising protection - R13 slip resistance

We haven't made any compromises when it comes to anti-slip properties either. The coating meets the highest standards for slip resistance and offers absolutely reliable protection.

How must the surface be prepared?

Cleaning:
The substrate must be thoroughly cleaned to remove dirt, oil, grease, dust, and other contaminants. This can be done by sweeping, mopping, or, if necessary, using pressure washers or special cleaning agents.

Drying:
The floor must be completely dry before any coating is applied. Check that no moisture is trapped in the substrate, as this can impair adhesion.

Surface inspection:
Check the floor for cracks, holes, or other damage. These should be repaired to ensure an even coating.

Dedusting:
After sanding (if necessary), the floor should be thoroughly dedusted again to ensure that no dust particles impair the adhesion of the new coating.

This careful preparation ensures that the anti-slip coating adheres optimally and maintains its effectiveness over a long period of time.

Do you have to sand the surface?

To increase surface roughness and improve coating adhesion, it may be necessary to grind or abrade the surface. This also removes old coatings that could impair adhesion.

Do I need a primer?

We generally recommend using a primer for this coating.

At what temperatures should processing take place?

The following guidelines apply to the optimal temperature for the application of the anti-slip coating.

Recommended temperature range: Our anti-slip coating should be applied at temperatures between 10 °C and 30 °C. This ensures that the coating adheres well and cures properly.

Avoiding extreme temperatures: At temperatures below 10 °C, the curing of the coating can be impaired, which may lead to poor adhesion and longer drying times. At temperatures above 30 °C, the coating may dry too quickly, which can also negatively affect adhesion and the final result.

Humidity: Humidity also plays a role. High humidity can prolong the drying time, while low humidity can accelerate curing.

Floor and surface temperature: The temperature of the surface itself should also be considered. Ideally, it should be within the recommended temperature range to ensure that the coating adheres well.

How long does it take for the anti-slip coating to dry?

The following guidelines apply to the drying time of the anti-slip coating.

Touch-dry: The anti-slip coating is touch-dry after approximately 1 to 2 hours. This means that the surface is no longer sticky, but it is not yet fully cured.

Curing: Full curing generally takes about 24 hours, depending on environmental conditions (such as temperature and humidity).  

Don't forget the accessories!

The processing of anti-slip coatings works perfectly with original accessories from Priotech Industrie.

Any questions about this product? Do you need a larger quantity?

This way