To Product Overview

Protec Invisible - Transparent anti-slip coating

Protec Invisible - Transparent anti-slip coating

Coverage: 100ml/m2
Color: Transparent

Note: The coating only becomes fully transparent after application and curing.

€129,90
€129,90
Tax included. Shipping calculated at checkout.
  • Secure Checkout
  • Tried and tested many times
  • Top Reviews

Plus shipping (calculated in the shopping cart)

Delivery time approx. 2 - 4 working days

Transparent anti-slip coating for showers, bathtubs, and wet areas. Suitable for tiles, acrylic, plastic, and other surfaces.

  • 2-component anti-slip coating. Hardener is included in the correct amount.
  • Virtually invisible after application
  • Excellent slip resistance
  • Perfectly suitable for tiles and acrylic in bathrooms, showers, wet areas, spas, etc.
Suitable for:
  • Applications where aesthetics are important (transparent coating)
  • Acrylic and ceramic (bathtubs, shower trays, bathrooms, tiles, granite, etc.)
  • Wood (wooden decks, wooden floors, etc.)
  • Visible areas (entrances, pool surrounds, spas, thermal baths, kitchens, etc.)

Questions about this product?

Quote for larger quantities?

Applications and suitability - Private and commercial

Color

Colorless (after application and drying)

Application
  • Tiles
  • Acrylic
  • Stone
  • Wood
  • Bathrooms & wet areas
  • Spa and wellness areas
  • Shower trays & bathtubs
  • Kitchens and canteens
  • Pools & pool surrounds
  • Storage rooms
  • Cold storage
  • etc.

Usage

Indoor and Outdoor Area

Processing

Apply with Protec roller or Protec spray gun

Pre-treatment

Surfaces must be thoroughly cleaned and degreased. If necessary, sand surfaces beforehand.

Consistency

Permanently durable.

Additional features

Forklift-proof
Abrasion-resistant
Very fast drying

Product description

Protec Invisible is an anti-slip coating that becomes almost completely transparent after application. Protec Invisible is the ideal choice whenever the coating should be as inconspicuous as possible, without compromising on top product quality. This anti-slip coating is versatile in its application.

It is a 2-component anti-slip coating, for which the hardener is supplied in the correct amount.

Protec Invisible - Transparent anti-slip coating

€129,90

Highlights of this product

Learn more about this product

Antirutsch Duschwanne

FOR BATH AND SHOWER

Ideally suited for acrylic

Protec Invisible is perfectly suited for use on acrylic, e.g., in acrylic shower trays, bathtubs, and floors. The coating is almost invisible after application, is easy to clean, and simple to apply. It provides excellent, long-lasting slip resistance.

Antirutsch Bad

TILED FLOORS IN ALL ROOMS

Perfect for tiled surfaces - for industrial and private use

Protec Invisible is suitable for all tiled floors. In bathrooms, spas, and wellness areas. But also in kitchens or storage and cold storage facilities. It is used in both private and industrial environments, such as in the food industry, in canteens or kitchens in the catering sector, or in healthcare.

Perfect for acrylic

The coating is perfect for acrylic surfaces such as bathtubs and shower trays.

Perfect for tiles

The coating is almost completely transparent once applied and is ideally suited for application on tiles.

Easy to clean

Despite the slightly rough surface - which provides the non-slip effect - the coating is easy to clean.

How must the substrate be prepared?

Cleaning:
The substrate must be thoroughly cleaned to remove dirt, oil, grease, dust, and other contaminants. This can be done by sweeping, mopping, and, if necessary, using high-pressure cleaners or special cleaning agents.

Drying:
The floor must be completely dry before applying a coating. Check that no moisture is trapped in the substrate, as this can impair adhesion.

Surface inspection:
Inspect the floor for cracks, holes, or other damage. These should be repaired to ensure an even coating.

Dedusting:
After sanding (if necessary), the floor should be thoroughly dedusted again to ensure that no dust particles impair the adhesion of the new coating.

This careful preparation ensures that the anti-slip coating adheres optimally and maintains its effectiveness over a longer period.

Do you need to sand the surface?

To increase surface roughness and improve coating adhesion, it may be necessary to grind or abrade the surface. This also removes old coatings that could impair adhesion.

Is a primer required?

In general, the product can also be used without a primer. However, it may be advisable to apply a primer to improve the adhesion of the anti-slip coating. This should be selected and applied in accordance with the manufacturer's instructions.

At what temperatures should processing take place?

The following guidelines apply to the optimal temperature for applying the anti-slip coating.

Recommended temperature range: Our anti-slip coatings should be applied at temperatures between 10 °C and 30 °C. This ensures that the coating adheres well and cures properly.

Avoiding extreme temperatures: At temperatures below 10 °C, the curing of the coating can be impaired, which may lead to poor adhesion and longer drying times. At temperatures above 30 °C, the coating may dry too quickly, which can also negatively affect adhesion and the final result.

Humidity: Air humidity also plays a role. High humidity can prolong drying time, while low humidity can accelerate curing.

Floor and substrate temperature: The temperature of the substrate itself should also be taken into account. Ideally, it should be within the recommended temperature range to ensure that the coating adheres well.

How long does it take for the anti-slip coating to dry?

The following guidelines apply to the drying time of the anti-slip coating.

Touch-dry: The anti-slip coating is touch-dry after about 1 to 2 hours. This means that the surface is no longer sticky, but is not yet fully cured.

Curing: Full curing generally takes approximately 24 hours, depending on environmental conditions (such as temperature and humidity).  

Don't forget the accessories!

Processing the anti-slip coatings works perfectly with original accessories from Priotech Industrie.

Do you have questions about this product? Do you need a larger quantity?

This way