Anti-slip vehicles, transport, traffic

• Remove rust, scale, and dirt (sandblasting, grinding).
• Degrease and dry.
• Use Protec primer
  

• Use plastic cleaner; perform adhesion tests if necessary.
• Very smooth plastics (PP, PE) are critical; special adhesion primer or more intensive mechanical roughening is required.

• Check the load-bearing capacity of the existing coating (cross-cut test, scratch test).
• Sand down and clean thoroughly.
• Remove any loose layers.

A good anti-slip coating can be identified by several features. Here are some important points you should look out for.

Slip resistance rating Pay attention to the slip resistance rating (e.g., R9 to R13 according to DIN 51130). The higher the value, the more slip-resistant the coating is.

Material quality High-quality anti-slip coatings consist of robust, long-lasting materials that are resistant to wear and chemical influences.

Ease of application A good coating should be easy to apply, either by yourself or by professionals. Check if clear application instructions are provided.

Drying time Find out about the drying time of the coating. A fast drying time can make usage easier.

Water and dirt repellent A good anti-slip coating should also be water and dirt repellent to promote hygiene and longevity.

UV resistance If the tiles are in an area with sunlight, the coating should be UV-resistant to prevent fading or embrittlement.

Durability Find out about the lifespan of the coating and whether it needs to be renewed periodically.

Certifications and tests Look for products that have been tested and certified by independent institutes. This gives you additional assurance regarding quality.

Our anti-slip coatings deliver what they promise. And we promise that we manufacture the best anti-slip coating on the market specifically for the freight and passenger transport sector. A big promise, we know. That’s why you should put us to the test! We would be happy to send you a sample.

R13 certification for the Protec TWO product Not all competitors achieve this highest slip resistance class according to DIN 51130.
Verifiable safety benefits – particularly important for professional operations and legal requirements.

Simple 1K handling (Protec R13 One) Suitable for quick repairs, maintenance, and retrofitting.

Durability and minimal wear Special fillers ensure a lasting anti-slip effect under heavy mechanical stress.
Significantly lower maintenance requirements.

High resistance to fuels, oils, and chemicals Indispensable in transport and aviation.
Competing products often quickly lose their adhesion or slip resistance in these conditions.

Versatile application possibilities Whether loading ramps, bus entry areas, aircraft stairs, or truck loading beds – one system covers numerous areas of application.
Competitor solutions are often only optimized for specific surfaces.